Single-wall

Single-wall aluminium doors

The best relation between price and appearance, provided in a significant number of colours, which can highlight the features of your shop or your own personality. Aluminium resistance to corrosion and lightness significantly reduce its maintenance.

All these models may be anodised or lacquered, according to RAL colour chart.

This is one of our star products introduced to the market and also widely imitated.

The external finish of this aluminium door is top-of-the-line and extremely resistant to wind and impacts. Its rubber gasket between louvres provides almost perfect tightness and also allows for silent unrolling, unparalleled regarding other types of doors.

Louvres up to 7.5 m can only be blind, with aluminium finish or colour-lacquered and also have micro-perforated louvres with 3.5-mm diameter perforations in a 8×8 mm mesh, also die-cast, with or without transparent 2-mm thick polycarbonate. They are prolifically combined with our double-wall model with louvres that can drastically increase strength by including special steel transverse components and guides inside this section.

These combinations provide a wide range of applications, in case of requiring a ventilation system, moderate lightning, or total visibility with or without the passage of air.

The end section, which is bigger, thicker and more rigid than the louvre, may house the inserted enclosure, safety anchors and a rubber gasket for tightness and silent touchdown, as well as Securantishock mechanisms to prevent accidents that make it possible to immediately stop of the manoeuvre without the door touching the hindrance.

Details

This enclosure stands out due to the following aspects:

  • Outstanding appearance; the door shows a smooth, crack-free finish, which provides a perfect fitting appearance, as if it were a marble wall.
  • Thanks to its perfect fitting it may be kept clean with a minimum effort and, also, its large smooth surfaces are ideal for customisation with logotypes, labelling or graphs or to get rid of them.
  • The quality of all materials is high, including synthetic rubber gaskets between louvres as well as nylon shoes of the highly resistant guides.
  • The different types of side guides available make installation of the product possible in most cases.
  • Louvre die-casting may be aligned or inserted and available in different sizes.
  • Die-casting may be closed with transparent or coloured 2-mm thick polycarbonate sheets.
  • Louvres may also be micro-perforated for several commercial uses.
  • Freely combinable with all louvre models of our Double Wall range.

This door is powered by a side motor for frequent manoeuvres or higher performance, or with a central motor that can be unclutched from the outside in case of a single internal entrance. By default, it is equipped with compensating springs for occasional manual use.

The set can be equipped with extra anti-theft and crush-proof measures.

Scope of use

Residential 80%
Commercial 100%
Industrial 60%

Rating

Safety 60%
Appearance 80%
Frequency of use 60%
Customisable 100%