Aluminium brings out facades and increases property value.
It has many advantages compared to other materials. It is lighter than steel and almost non-corrosive and maintenance free.
All these models may be anodised or lacquered, according to RAL colour chart.
This is one of our star products introduced to the market and also widely imitated.
This is one of our star products introduced to the market and also widely imitated.
This aluminium door has top-of-the-line indoor and outdoor finishes, and both of them are symmetric and very resistant to wind and impacts. Rubber gaskets between louvres provide almost perfect tightness with excellent thermal and sound insulation, and also allows for silent unrolling, which cannot be achieved in other types of doors.
Double-wall louvres of up to 7.5 m can only be blind, with aluminium finish or colour- lacquered, but are prolifically combined with our single-wall model with micro-perforated die-cast louvres, with or without transparent 2-mm polycarbonate.
Louvres may be filled with high-density polyurethane (45-50Kg/m³) to improve resistance and reinforce sound and thermal insulation. It can also drastically increase its strength by including special steel transverse components and guides inside this section.
One of these products, our Alutherm model, is specially designed for thermal insulation.
The end section, which is bigger, thicker and more rigid than the louvre, may house the inserted enclosure, safety anchors and a rubber gasket for tightness and silent touchdown, as well as Securantishock mechanisms to prevent accidents that make it possible to immediately stop the manoeuvre without the door touching the hindrance.
This door is powered by a side motor for frequent manoeuvres or higher performance or with a central motor that can be unclutched from the inside in case of a single internal entrance. By default, it is equipped with compensating springs for occasional manual use.
The set can be equipped with extra anti-theft and crush-proof measures.